^{A FAST AND POWERFUL TRENCHLESS PIPE REPLACEMENT SYSTEM FOR WATER, GAS OR RISING MAINS}

^{Many kilometres of pipe are in need of replacement, due to deterioration or because the pipes are just too small.  Traditional methods can be costly and disruptive. Maxiburst requires just two access points and occupies minimal area above ground.}

^{The old pipe is totally replaced by new welded polyethylene.}

Maxiburst has already been used successfully to replace many kilometres of mains.  Pipe can be replaced at rates of up to 1 metre per minute.

 ^{REPLACES
 pressure or gravity pipes
 (water, gas, sewer etc.)}

 WITH NEW APPROVED
 POLYTHYLENE PIPE

 - Less digging
 - Less disruption
 - Inexpensive
 - Simple to operate
 - Fast insallation
 - Quiet
 - Powerful
 

^MAXIBURST

^{How it works}

 ^{- Winch placed into pit 1
 - Winch rods inserted into old pipe from pit 1.  Will  bore through
   encrustation in old pipe
 - Rods connected to head in pit 2.
 - New pipe is located in shield on rear of head
 - Head winched into old pipe, creating annulus for new pipe.
 - Winching continues until head reaches pit 1 and full length of pipe in
   place.}

 ^{Old Pipe:-
 Maxiburst will replace most
 fractural pipe including:-
 - cast iron
 - pitch fibre
 - concrete
 - clayware
 - asbestos cement
 - PVC}

 New Pipe:-
 - Welded polyethylene as
   standard
 

 Size Range:-
 50mm to 200mm
 (with standard 40 ton winch)

 Distance:-
 To 150m

 Rate of progress:-
 to 1m per minute

 AVAILABLE FOR HIRE OR
 PURCHASE
 

^{BACK TO}

^{SPECIALIST
SERVICES}